The Theatrixx xVision Reversible DMX Splitter/Isolator provides three optically isolated DMX outputs plus a direct thru, all via 5-pin XLR – from a single hot-swappable module. Optical isolation rated to 1000V protects against ground loops and voltage spikes between lighting rigs, while RDM forwarding and a Timing Safe Mode for legacy fixtures make it practical for mixed-vintage lighting systems.
Outputs
3 + Thru
Isolated + direct
Isolation
1000V
Optical isolation
Connector
XLR 5-Pin
Standard DMX
Protocol
DMX + RDM
With forwarding
Timing Safe Mode
Some older fixtures are sensitive to DMX timing variations introduced by splitters. Timing Safe Mode adjusts the output timing to maintain compatibility with legacy equipment – useful when mixing older moving lights or dimmers with modern consoles.
Features
✓
1:3 DMX splitter with optical isolation to 1000V
1:3 DMX splitter with optical isolation to 1000V
✓
Direct thru output for daisy-chaining
Direct thru output for daisy-chaining
✓
RDM forwarding supported across all outputs
RDM forwarding supported across all outputs
✓
Timing Safe Mode for compatibility with legacy fixtures
Timing Safe Mode for compatibility with legacy fixtures
✓
5-pin XLR connectors throughout – no adapters needed
5-pin XLR connectors throughout – no adapters needed
✓
Reversible design – insert from front or rear of frame
Reversible design – insert from front or rear of frame
✓
Hot-swappable – swap modules without powering down
Hot-swappable – swap modules without powering down
✓
Fully enclosed module – protected against static, dust, and wear
Fully enclosed module – protected against static, dust, and wear
Note
Requires a Theatrixx 2-Bay (RF2) or 8-Bay (RF8) Reversible Rackmount Converter frame (sold separately).
Specifications
| SKU | XVVRMOPTO5 |
| Input | 1x DMX512 (5-pin XLR) |
| Isolated Outputs | 3x DMX512 (5-pin XLR) |
| Thru Output | 1x DMX512 (5-pin XLR, direct) |
| Optical Isolation | 1000V |
| RDM Support | Yes, with forwarding |
| Module Size | Single-width |
| Compatible Frames | xVision RF2 (2-Bay), RF8 (8-Bay) |
