Elumen8 adhesive-lined heatshrink tubing in a 6.4mm (1/4″) supplied diameter with a high 3:1 shrink ratio, supplied on a 100m reel. This fine-bore, dual-wall sleeving seals and insulates small solder joints, wire terminations and thin cable tails, while the 100m reel keeps a workshop or flight case stocked for regular cable work. A bench staple for cable techs and audio/lighting engineers.
SHRINK RATIO
3:1
Dual-wall
SUPPLIED Ø
6.4mm
1/4″
RECOVERS TO
~2.1mm
min diameter
REEL LENGTH
100m
black
Features
✓3:1 shrink ratio recovers to roughly one third of its supplied diameter for a snug fit on fine wires and terminations
✓Dual-wall construction with a hot-melt adhesive inner liner that flows when heated to fill voids and seal out moisture and dirt
✓Bonded, moisture-resistant seal suited to outdoor and touring cable work
✓Adhesive lining grips the wire jacket for strain relief and stops the sleeve creeping under repeated flexing
✓Tough polyolefin outer wall adds electrical insulation and abrasion resistance over the joint
✓Supplied on a continuous 100m reel for cutting to length on the bench
✓Discreet matt black finish blends into looms, connector tails and dark rigs
✓Recovers evenly with a standard hot air gun, backed by a 1 year Elumen8 warranty
Specifications
| Type | Adhesive-lined (dual-wall) heatshrink tubing |
| Shrink ratio | 3:1 |
| Supplied diameter | 6.4mm (1/4″) |
| Recovered diameter | Approx 2.1mm (fully recovered) |
| Inner wall | Hot-melt adhesive liner |
| Outer wall | Polyolefin |
| Colour | Black |
| Supplied length | 100m reel |
| Brand | Elumen8 |
| Warranty | 1 year |
