A 1m LEDJ-branded power link — Midnight Black PCE 16A T-Connect inlet/through to a Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP fixture connector — on 1.5mm² Titanex H07RN-F. The shorter 1m run and 1.5mm² flex suit closely-spaced LED battens, uplighters and lower-draw moving heads.
LENGTH
1 m
end-to-end
CABLE
1.5 mm²
Titanex H07RN-F
INLET
16 A T-Connect
PCE Midnight Black
FIXTURE END
TRUE1 TOP
NAC3FX-W-TOP-L
Cable size note
This cable uses 1.5mm² flex — sized for typical LED-fixture loads and shorter runs. For high-draw fixtures, long throws, or rigs that will push close to the 16 A limit, use the 2.5mm² Elumen8 versions of this cable instead.
Features
✓Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP fixture connector
✓PCE 16A Midnight Black T-Connect with integrated pass-through
✓1.5mm² Titanex H07RN-F tough rubber-sheathed flex
✓1m suits closely-spaced LED battens and floor pars
✓Clear heatshrink sleeve ready for asset/ID labelling
✓TRUE1 TOP is breakable under load and IP65 when mated
✓Daisy-chains TRUE1 TOP fixtures off a single 16 A feed
✓LEDJ build at a more accessible price than the 2.5mm² Elumen8 line
Note
powerCON TRUE1 TOP (NAC3) is mechanically incompatible with the older non-TOP TRUE1 (NAC3-X) and the original blue/grey powerCON. Confirm your fixtures carry the TOP variant before ordering.
Specifications
| Brand | LEDJ |
| SKU | CABL344 |
| Length | 1 m |
| Inlet end | PCE 16A Midnight Black T-Connect (in/out) |
| Fixture end | Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP |
| Cable | 1.5 mm² Titanex H07RN-F |
| Connector rating | 16 A / 230 V AC |
