A 1.5m IP-rated DMX cable from LEDJ, terminated with Seetronic 5-pin male and female XLR connectors. A short jumper for fixture-to-fixture daisy-chains on outdoor rigs that follow the standard 5-pin DMX spec.
LENGTH
1.5 m
male to female
CONNECTORS
Seetronic IP
5-pin XLR
PROTECTION
IP65
when mated IP-to-IP
SIGNAL
DMX512
5-pin standard
IP rating
IP65 protection is only maintained when both ends are mated with Seetronic IP rated counterparts. Mating to a standard 5-pin XLR breaks the seal at that end but the cable remains fully cross-compatible for signal.
Features
✓
Seetronic IP-rated 5-pin XLR connectors at both ends
Seetronic IP-rated 5-pin XLR connectors at both ends
✓
Internal seals on the connector resist moisture ingress
Internal seals on the connector resist moisture ingress
✓
Cross-compatible with standard 5-pin XLRs
Cross-compatible with standard 5-pin XLRs
✓
IP65 rated when mated to matching Seetronic IP connectors
IP65 rated when mated to matching Seetronic IP connectors
✓
1.5m length suits tightly-spaced fixture chains
1.5m length suits tightly-spaced fixture chains
✓
Suitable for outdoor architectural and event lighting installs
Suitable for outdoor architectural and event lighting installs
✓
Carries standard DMX512 control data
Carries standard DMX512 control data
✓
Matches 5-pin output on most professional lighting consoles
Matches 5-pin output on most professional lighting consoles
Note
This is the 5-pin variant. If your fixtures or chain use 3-pin DMX (common on entry-level LED fixtures), the matching 3-pin Seetronic IP version is the right choice.
Specifications
| Length | 1.5 m |
| Connector A | Seetronic IP 5-pin male XLR |
| Connector B | Seetronic IP 5-pin female XLR |
| Ingress protection | IP65 (when mated with matching Seetronic IP connector) |
| Signal | DMX512 |
| Brand | LEDJ |
| SKU | CABL549 |
