A 5m IP-rated DMX cable from LEDJ, terminated with Seetronic 3-pin male and female XLR connectors. A versatile mid-length lead for outdoor LED rigs, IP fixture daisy-chains and stage perimeter runs.
LENGTH
5 m
male to female
CONNECTORS
Seetronic IP
3-pin XLR
PROTECTION
IP65
when mated IP-to-IP
SIGNAL
DMX512
3-pin standard
IP rating
IP65 protection is only maintained when both ends are mated with Seetronic IP rated counterparts. Mating to a standard XLR breaks the seal at that end but the cable remains fully cross-compatible for signal.
Features
✓
Seetronic IP-rated 3-pin XLR connectors at both ends
Seetronic IP-rated 3-pin XLR connectors at both ends
✓
Internal seals on the connector resist moisture ingress
Internal seals on the connector resist moisture ingress
✓
Cross-compatible with standard 3-pin XLRs
Cross-compatible with standard 3-pin XLRs
✓
IP65 rated when mated to matching Seetronic IP connectors
IP65 rated when mated to matching Seetronic IP connectors
✓
Common 5m length covers most fixture-to-fixture spans
Common 5m length covers most fixture-to-fixture spans
✓
Suitable for outdoor architectural and event lighting installs
Suitable for outdoor architectural and event lighting installs
✓
Carries standard DMX512 control data
Carries standard DMX512 control data
✓
Daisy-chains exterior LED fixtures and IP moving heads
Daisy-chains exterior LED fixtures and IP moving heads
Note
This is the 3-pin variant. If your fixtures use 5-pin DMX (more common on professional consoles and some moving heads), you need the matching 5-pin Seetronic IP version.
Specifications
| Length | 5 m |
| Connector A | Seetronic IP 3-pin male XLR |
| Connector B | Seetronic IP 3-pin female XLR |
| Ingress protection | IP65 (when mated with matching Seetronic IP connector) |
| Signal | DMX512 |
| Brand | LEDJ |
| SKU | CABL544 |
